Our pipe to pipe adaptors are made from a single piece of tube so can be as short as possible. This gives you plenty of room when working with tight bends and around the chassis of your car.
All of our adaptors are sized to accept standard exhaust tube sizes and to fit into standard component sizes. That way you can be confident that when you receive your pipe adaptor no tweeking is required.
Most other sellers are stockists, we are manufacturers and therefore understand the process of tube manipulation and what goes into top quality tube manipulation.
| Reducers | |
| Reducer Inlet Size | 50.8mm / 2" ID |
| Reducer Outlet Size | 31.75mm / 1" 1/4 ID |
50.8mm (2") ID to 31.75mm (1" 1/4) ID Exhaust Reducer/Expander
- Brand: Every Exhaust Part
- Product Code: 31.75ID-50.8ID
- Availability: In Stock
-
£7.20
- Ex Tax: £6.00
Available Options
Related Products
50.8mm / 2" x 90 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£13.00 Ex Tax: £10.83
50.8mm / 2" x 60 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£13.00 Ex Tax: £10.83
50.8mm / 2" x 45 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£13.00 Ex Tax: £10.83
50.8mm / 2" x 30 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£13.00 Ex Tax: £10.83
50.8mm / 2" x 15 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£13.00 Ex Tax: £10.83
50.8mm / 2" x 180 Degree Mandrel Bend 1.5D T304
Precision mandrel bend to avoid crushing in the bend which aids flow. This tube bend is made f..
£18.00 Ex Tax: £15.00